TUBE, RACK MOUNTING GUITAR AMPLIFIERS.

SIGNAL STATION 3 CHANNEL PRE-AMP WITH MIDI Featuring 3 independent all tube channels with there own gain, Bass, Treble, mid and master. Channel changing is assignable to any midi patch number. This all tube pre-amp offers the best performance per dollar anywhere!

$999.00

SIGNAL STATION 5050 STEREO POWER AMP This 2 rack space stereo power amp comes with either SOVTEK 5881s or EL34g power tubes and features input Volume, Presence, Depth per channel and is fan cooled.This serious little 50 watt amp is very loud and the bottom end has to heard to be believed.

$1599.00

SIGNAL STATION 2100 STEREO  POWER AMP The flagship of the fleet, the 2100 is a monster amplifier capable of achieving meltdown sound levels. Having the same controls as the 5050 the, 2100 is 3 rack space, 4 EL34 or 5881s per channel, 2 speed fan and half power switch. Imported amplifiers of this calibre cost twice as much!

$1999.00

STEREO TUBE WET/DRY EFFECTS MIXER Allows you to mix your wet signal from your effects with you dry using tubes to retain that tube tone and punch 1 rack high, has 2 stereo inputs with level control and output master. Can also be used as a stereo 2 channel mixer

$450.00

TUBE HEADS AND COMBOS

VINTAGE 112 COMBO WITH REVERB This little amp has hi low inputs, gain, bass, treble, mid, master volume and reverb controls and produces about 30 watts of vintage tone from 2 X 6L6s and a tube rectifier. It has 3 x 12ax7s and 1 x 12AT7 reverb driver. Circuitry is point to point wiring based on a vintage fender design. Also featured is a long delay 2 spring reverb tank, Celestion speaker and fender type imported tolex. Hardware includes switchcraft sockets, carling switches ceramic tube sockets and hand wound transformers. Very basis, light weight and portable with great vintage tone!!!

$1499.00

REVERB TANK AMPS Novelty tube amps made from old unwanted reverb tanks 10 watt push pull output (2 x El84) with volume and tone10 watt single ended class A (1x El34)with Volume and tone For a really great vintage sound installed tank amp into a speaker box loaded with Celestian speaker, turn vol to full and start playing! Cheap but beautiful

$399.00

FAT HEAD- 100 W ALL TUBE HEAD 4 channels, midi assignable, Clean, Clean/edge, Rhythm, and Lead. 4 power modes, 100w, 50w, 25w, 7w using High/Low Power switch and 2 or 4 power tubes (part of TMS). Gain and Master Volume controls for each channel. 2 sets of EQ control, Bass, Mid and Treble, priority midi Assignable. 2 position Bright switches for the clean channels. 2 position boost switches for dirty channels. A B master volumes, midi assignable, for volume boost in any channel. A B presence and Depth controls, midi assignable to any channel. Series, Parallel effects loop, with send and return and bypass. Internal effects mixing via effects level control, also effects by-pass, midi assignable. Tube Management System (TMS). Power tube Bias status, indicator leds, Bias adjusting controls and cathode fuse for each power tube. Power tube set switches, ie. tubes 1 & 4 on, or 2 & 3 on, or  all 4 tubes on, or all 4 off for pre-amp use only.( part of  Sherlock amplifiers T.M.S.). Parallel speaker output sockets (switchcraft). Speaker Impedance switch, 16, 8, and 4 ohms. Midi in, Midi through sockets on rear. EL34, 6550 or 6L6 power tubes. 7 High gain, selected, 12AX7 pre-amp and splitter tubes. Chrome Toggle power and standby switches. All other switches are chrome metal (except impedance switch. All knobs are silver chrome Telecaster type, (21 total). All sockets are metal switchcraft (except send and return). Front panel leds are 3mm clear non-diffused types, colours are green, yellow, blue, red.

$3499.00

EFFECTS AND ACCESSORIES

TREMIT  TREMOLO PEDAL Features . Wide speed range.Depth control. Sine and square wave switch. Speed ind. Battery or plug packoperation. Quality components used through out. Small size. Sounds great.

$235.00

9 VOLT 1AMP REGULATED DC POWER SUPPLY For any pedals etc inc. boss pedals. Includes power switch, fuse, regulating IC with short circuit protection, 3 DC outlets(18 volt output also available if required)

$120.00

A/B SWITCHING BOX, 1 BUTTON BOX powder coated diecast, with heavy duty Carling switch and Switchcraft sockets

$85.00

A/B AND A+B SWITCHING BOX 2 BUTTON  AB BOX powder coated diecast, with heavy duty  Carling switch and Switchcraft sockets.

$110.00

SOLID STATE BOOST PEDAL This little pedal has huge amounts of gain but dose not distort It just drive a tube amp harder and does not contribute to the soud

$180.00

MIDI GEAR

MIDI OCTIGATOR 8 CHANNEL SWITCHER with led display.  Assie made octopus

MIDI MOD KIT complete with  instructions and installation parts inc. prog switch and din socket.  Note: PCB is pre-assembled and tested

$499.00

$159.00

 

AMPLIFIER TUBES

$20.00
$20.00
$17.00
$25.00
$25.00
$25.00
$87.00
$50.00
$32.00
$35.00
$35.00
$45.00
$35.00
$35.00
$25.00
$28.00
$25.00
$20.00
$20.00
$45.00

 

TUBE SOCKETS

9PIN CERAMIC WITH SHIELD (12AX7 TYPE)

8PIN CERAMIC CHASSIS MOUNT

8PIN CERAMIC PCB MOUNT

POWER TUBE RETAINERS (spring type for 5881)

$6.50

$4.00

$3.50

$3.50

 

HIGH QUALITY POTENTIOMETERS

CTS POTS       available  in     5k, 10k, 25k,100k,250k linear

CTS POTS       available  in      500k and 1m log

MARSHALL pots for VALVE STATES amps   16m body,spline shalft, pcb mount  All values

WHA PEDAL POTS    100K with pinion gear

NOTE: We have lots of different pots. please call for quote & availibility

$4.50

$4.50

$3.50

$39.00

 

PLUGS & SOCKETS

6 MM MONO SOCKETS switchcraft (without switch 12)

6 MM MONO SOCKETS switchcraft ( with  switch 12A)

6 MM MONO SOCKETS switchcraft (with switch and longer bushing  L12A)

6 MM MONO SOCKETS CLIFF  (plastic pcb mount and normal)

6 MM MONO PLUG STRAIGHT (switchcraft)

6 MM STEREO PLUG STRAIGHT(switchcraft)

3 MM MONO PLUG chrome metal

RIGHT ANGLE 6MM MONO PLUG switchcraft   (P128)

RIGHT ANGLE 6MM MONO PLUG leem

PHONO PLUG, chrome metal

SHORTING PLUG FOR HUM FREE DISCONNECTION OF GUTAIR

CUSTOM LEAD SERVICE AVAILABLE any connector with any Cable

SOLDER 1 PLUG TO CABLE

$4.00
$4.50
$4.50
$3.00
$5.00
$7.00
$2.80
$7.00
$2.50
$3.50
$25.0
$3.50

 

D.C. POWER CONNECTORS

2.1 MM PLUG, PLASTIC STAIGHT CONNECTOR BLACK (DC)

2.5 MM PLUG, PLASTIC STAIGHT CONNECTOR BLACK (AC)

2.1 MM PLUG, RIGHT ANGLE PLASTIC BLACK

2.1 MM SOCKET CHASSIS MOUNT, BLACK

2.5 MM SOCKET CHASSIS MOUNT, BLACK (AC)

$2.50

$2.50

$2.50

$2.80

$2.80

 

SWITCHES 

CARLING FOOT SWITCHES high quality heavy duty

SPST chassis mount      ( used for amp function switching etc)

SPDT chassis mount    (for crybaby wha pedals, by-pass switch)

DPDT chassis mount  ( used for true bypass)

TOGGLE SWITCHES

CARLING SPST (chassis mount used for power/stby in amps

DPDT (chassis mount  used for power or stby)

MINI TOGGLE SPDT

MINI TOGGLE DPDT

MINI MOMENTARY SPDT (with cap)

MARSHALL illuminated power switch

$7.95
$14.95
$19.95
$7.95
$4.95
$3.00
$5.00
$4.00
$20.00

 

 AMPLIFIER  HANDLES 

AMP HANDLE chrome ends (similar to fender handles)

VOX AC 30 handles    (HC24C)

STANDARD PLASTIC (with chrome metal ends)

FENDER HANDLES (chrome ends 4 screws)

MARSHALL HANDLES (black plastic ends)

$12.00

$14.95

$7.00

 

 AMPLIFIER  HARDWARE

CORNERS

BLACK powder coated

NICKEL   plated

PLASTIC stackable

RUBBER FEET

LARGE   38 MM DIA. X 15MM HIGH

MEDIUM

SMALL STICK ON  9MMX 4MM (pack of 4)

$1.50
$1.50
$1.20
$1.80
$2.00

 

OPTO ISOLATOROS

VTL5C1 opto isolator used for switching in tube amps

OPTO for vibrato/tremolo in fenders

$15.00

$36.50

 

GLOBES   

FENDER GLOB 6v

MORLEY WHA PEDAL GLOB 38v

$5.95

$4.50

 

ACCUTRONICS SPRING REVERB UNITS

LONG TANK

4AB3C1B 2 spring, long delay (fender, Marshall, ampeg type F)

4BB2A1B  2 spring, medium delay  (Music Man replacement)

9AB3C1B  3 spring, long delay fender

SHORT TANK

8EB2C1B 3spring, medium delay replacement MusicMan fender   Peveay

8DB2C1D 3spring, medium delay replacement Marshall

REVERB DRIVER Transformers for Fender etc

$95.00
$95.00
$125.00
$85.00
$85.00
$45.00

 

CABLES

CANARE GS-6 single core shielded with noise reduction sheath, black

CANARE l-2T25 Twin shielded mic cable, black

DICK SMITH 2032 cheaper single shielded cable, black

240v 3core Flex, gray

AVICO SAC40 4 core cable with sheild  black

AVICO SAC24 2 Twin shielded black

AVICO LV1B  2 core fig 8 light, black with white line

$3.60/m

$4.90/m

$2.50/m

$2.50/m

$1.80/m

$1.80/m

$1.00/m

 

TRANSFORMERS

CRATE GT-80 power transformer

REVERB  DRIVER Transformer for Fender etc

$99.00

$45.00

 

TRANSFOMER   REPAIRS AND REWINDS

VINTAGE AMPS. For Vintage amps, we would pull the faulty transformer down taking note of the winding techniques and materials used and rewind exactly the same way. We will use the original steel laminations, same winding techniques, same covers, wire color coding and mounting brackets to restore the transformer. This will ensure the transformer sounded and looks the same, and also fits straight back into the holes in the chassis.(see transformers- repairs and rewinds)

CUSTOM TRANSFOMERS. Sherlock Amplifiers can make any transformer, either for tube or solid state amps. All that is required is that you tell us what you want and what you want it for and we will design a transformer for you. Any transformer, for any amp can be easily made!

STANDARD REPLACEMENT TRANSFOMERS. We can source transformers for all the common amp i.e. Marshall's and Fenders Crate Laney, Boogie etc, We also can fit them and go over you amp to ensure its in top working order after the installation. Most modern day transformers are mass-produced and do often fail prematurely so you can up grade to a hand made transformer from us

$120-$170
$90- $140
$70- $100
$40 -$80
$150-$190
$120$160
$100-$130
$80 -$100
$40- $70